Skip to main content

Using Smart Guides

Smart Guides are guidelines that display in the 2D window when you are moving a piece or internal element - such as artwork, or an internal line.

  • With Smart Guides enabled, when moving an internal element, a magenta colored guideline displays showing the bounding box edge of the piece, or the horizontal or vertical center lines of the piece, when the internal element being moved comes close to it.

    The following image shows the horizontal and vertical center lines of the piece being displayed, while moving the artwork.

    Smart Guides are enabled

    The following image shows the left side bounding box edge of the piece being displayed, while moving the artwork.

    Smart Guides are enabled

  • With Smart Guides enabled, when moving a pattern piece, a magenta colored guideline displays showing the bounding box edge of a piece that the moving piece is coming close to.

    The following image shows the top side bounding edge of the back piece being displayed, while moving the sleeve piece.

    Smart Guides are enabled

Enabling and Disabling Smart Guides

You can enable or disable all Smart Guides as preferred. You can also choose which elements should trigger Smart Guides. In other words, which elements when moved, cause Smart Guides to display.

For details, expand the following:

© Browzwear Solutions Pte. Ltd. 2018-2021. All rights reserved. Legal Notices

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section