A pull cord is a 3D object in FBX format.
To add a pull cord to a zipper:
If the Materials tab is not already open, on the Resources tabs, click Materials.
On the Materials tab, in the Trims section, in Edge Assignable, hover over the zipper image.
Click . A menu is displayed.
Lotta 2019 April Edition and newer
Click Look Inside to view the zipper parts. The zipper parts are displayed in a pop-up pane.
In the Pull Cord part, click . A file explorer window is displayed.
Navigate to the location of the pull cord object you want to use, and select it.
Click Open. The Customize 3D Object dialog box is displayed.
Edit the properties in the Customize 3D Object dialog box as required.
Displays A/B where A is the current vertical facing displayed, and B is the number of available vertical facings.
Click or to select the vertical facing. As you click, the pop-up pane displays the updated facing.
Displays the horizontal facing, being one of the following
Click or to select the horizontal facing. As you click, the pop-up pane displays the updated facing.
Whether the object is symmetrical. Enabled by default
Units of measurement.
Read-only. Height of the object.
Click OK. The pull cord is added to the zipper.The 3D Object Editor still displays. You can use the editor to edit the geometry or the connectors of the 3D object. For more information, refer to and .