Skip to main content

Corrupted Pattern Pieces

Problem: Pattern pieces do not import correctly into VStitcher.

Solution: Check the export DXF (AAMA) settings on the software used to create the DXF file. In particular, ensure the layers are set correctly.

For example, the following table summarizes the settings for exporting a DXF file from Lectra software. It may be useful as a guide for other software if no other recommendations are available.

Layers

NameNumberNote

Current layer

0

Empty

Contour

1

Closed curve - must include external cut line

End points

2

Points on curves

3

Notches

4

Points on curves

Grading lines

5

Mirror axis

6

Material axis

7

Lines to be plotted

8

Internal lines to be plotted

Horizontal material axis

9

Grain line and cross line

Vertical material axis

10

Lines to be cut

11

Internal lines to be cut

Cutter instructions

12

Tools to be ignored

Drill number 1

13

Punching holes

Seam Lines

14

Orange - must include sew line

Text

19

© Browzwear Solutions Pte. Ltd. 2018-2021. All rights reserved. Legal Notices

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section