Skip to main content

2D Window Details

2D window

The 2D window displays pieces, stitches, and other shape related elements.

2d Window

With your mouse in the 2D window, press Tab to maximize the window. Press Tab again to reverse the action.

Navigating and Selecting in the 2D Window

You can navigate and select in the 2D window by:

Configuring the 2D Window Display

In addition to using the 2D window toolbar options, you can further configure the 2D window display.

To configure the display:

  1. On the Main menu, click View, then 2D Display. A menu is displayed.

  2. Click to enable or disable the options as required.

    OptionIf Enabled

    Textures

    Textures are displayed.

    Stitches

    Stitches are always displayed.

    Nest

    Grading (if any) is displayed.

    Allowance

    Seam allowances are displayed.

    Internal Lines

    Internal lines are displayed.

    Trace Changes

    When you make changes to a pattern piece, an outline of the original pattern piece - before the change - is displayed. Tip: It may be easier to view if you disable the display of textures. The following image shows how the feature works.

    Trace changes

    Shape Info

    ID of certain elements is displayed, according to those chosen under Shape Options.

    Grain Line

    Grain line direction is displayed.

    Background Grid

    Background grid is displayed.

    Grade Points Numbers

    Grade point numbers are displayed.

    Show Dimensions

    Dimensions of pattern piece edges are displayed.

    Smart Guides

    If enabled, certain guidelines are displayed, according to those chosen under Smart Guides Options. For more information, refer to Using Smart Guides.

Synchronizing the 2D Window Display

You can sync the 2D window so that it displays the pattern pieces in the same general layout as in arrange mode.

  • To sync with arrange mode using 2019 August Edition and newer:

    1. Ensure the 2D window is displayed.

    2. On the Main menu, click View, then Sync Layout. The available options are displayed.

      Sync arrange mode

    3. Click By Arrange Mode. The pattern pieces are displayed in the 2D window to conform with the same general layout in arrange mode.

  • To sync with arrange mode using VStitcher 2019 April Edition and older:

    1. Ensure the 2D window is displayed.

    2. On the Main menu, click View, then click By Arrange Mode. he pattern pieces are displayed in the 2D window to conform with the same general layout in arrange mode.

© Browzwear Solutions Pte. Ltd. 2018-2021. All rights reserved. Legal Notices

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section