Issue with smart zippers

  1. Browzwear Help Center
  2. Community
  3. Materials & Colors
Avatar
Sonziry Guzman

hi,  

I am having issue inserting the zip on the final project.  Zipper does not look great at the corner. The corner either looks looks distorted or the zipper is not stitched at he corner. Also the stopper looks off center and like its about to fall off.  Pls help?

That you

SG

 

 

 

0

Comments

4 comments
Date Votes
  • Avatar
    Zisie Benchimol

    Hi Sonziry, 

    You will need to add a corner point at the other edge on the zipper.
     
    See how the zipper is now, it seems as if it is trying to sew into the 90-degree angle. When a corner point is added this issue will be resolved. You may need to also re-assign the zipper. 
     
    Best of luck, 
    Zisie 

     

    0
  • Avatar
    Sonziry Guzman

    Hi Zisie,

    I tried that before and what happens is that i end up with a whole a the  top.  you can see that on one of the pictures I sent before.  Images I sent were showing both method...

    I will give it another try but that did not work for me before.

    Thanks,

    SG.

     

     

     

    0
  • Avatar
    Zisie Benchimol

    Hi there, 

    I recommend that you should stitch the end in, as it is possible when it is not stitched in, that it can create a hole.
     
     
    Hope this helps now, 
    Good luck, 
    Zisie 
    0
  • Avatar
    Sonziry Guzman

    Hi Zisie, 

    Thank you for getting back. Yes that closed the opening at the top.  I was not aware we needed to do that for smart zippers.  I  thought the program would stitch it in automatically all around.

    The last thing i have on this issue it why is the zipper end sitting on the side of the zipper and not the center and why it has those 2 legs stitching out from the bottom of zip stopper.  you can see it on the images i submitted before.

    Thank you,

    SG

     

     

    0

Please sign in to leave a comment.

Didn't find what you were looking for?

New Community Post