The Review windows allow you to view the avatars and garments side by side. You can navigate, run simulations, and use selection tools in the Review windows. You can also control the layout of the windows to accommodate your needs.
Note
There is only one active Review window, and its handle is dark gray. This is the window in which actions and simulations are done. Click anywhere inside a Review window to set it as the active window.
The following image is an example of 3D Review windows. The active window has a dark gray handle. At the bottom of each Review window a display name appears which consists of the avatar name and garment size.
The 3D Review window features are described in the following table.
Icon | Description |
Toggle to hide and display the Pose Selector and the 3D measurements button. | |
Click to display the 3D measurement options window. | |
Click to display the Poses list. | |
Click to move the Review window around and change the arrangement of the Review windows. | |
Click the drop-down to display avatar view options. | |
Click to remove a Review window from the 3D display area. |
For more information, expand the following:
Cloning a Review Window
You can clone a Review window to add a new one in the 3D display area.
To clone a Review window:
Right click inside the Review window that you want to clone. Options are displayed.
Click Clone Review Window. The Review window is cloned and a new Review window is added to the 3D display area.
You can also clone a Review window using the Context view.
To clone a Review window using the Context view:
Click the Review window that you want to clone. The Context view options are displayed.
In the Context view, ensure Review Window is selected.
Click Clone Review Window. The Review window is cloned, and a new Review window is added to the 3D display area.
You can also clone the current active window using the Resources tabs.
To clone the current active window:
Click the active Review window that you want to clone. The Review window handle turns dark grey.
At the top left of the Resources tabs, click Add Review Window.
The current active window is cloned and added in the 3D display area as a new window.
Adding a Review Window
You can add a new Review window with a certain avatar or size to the 3D display area.
To add a new Review window with a certain size or avatar to the 3D display:
on the Resources tabs, click either Sizes or Avatars. The Sizes or Avatars tab is displayed.
Hover over the desired avatar or size in the list. An add a Review window icon
appears at the right side of the item.
Click
. A new Review window with the selected size or avatar is added to the 3D display are.
Removing a Review Window
You can remove Review windows from the 3D display.
To remove a Review window:
Click the Review window that you want to remove. An active window toolbar is displayed at the top of the Review window.
At the right end of the toolbar, click
. The Review window is removed from the 3D display area.
You can also remove a Review window using right-click.
To remove a Review window using right-click:
Right click inside the Review window that you want to remove. Options are displayed.
Click Remove Review Window. The Review window is removed from the 3D display area.
You can also remove a Review window using the Context view.
To remove a Review window using the Context view:
Click the Review window that you want to remove. The Context view options are displayed.
In the Context view, ensure Review Window is selected.
Click Remove Review Window. The Review window is removed from the 3D display area.
Changing Review Windows Layout
There are the following layout modes for the Review windows:
Each mode includes different features and can be viewed in Horizontal, Vertical, or Wrap display.
Maximized Mode
When Maximized mode is enabled the Review windows occupy the width or height of the display area. You can add and remove Review windows from the 3D display area. For more information, refer to Adding a Review Window and Removing a Review Window.
In the Visible Windows section, you can change the number of windows that are visible.
The default number of visible windows is three
If the number of existing windows is larger than the number of visible windows, some windows may be hidden. A scroll bar appears under the windows to scroll and display invisible windows.
In the following images four Review windows exist but only three are visible, notice the scroll bar placement in each view.
The following image is an example of the Maximized mode in Horizontal display.
The following image is an example of the Maximized mode in Vertical display.
The following image is an example of the Maximized mode in Wrap display.
Fixed Mode
When Fixed mode is enabled, you can manually set the width and height of the windows to a minimum of 10px and a maximum of 7680px, using the Height and Width section.
The width and height of a single window cannot exceed the Review windows display area. Unlike in Maximized mode, when Fixed mode is enabled you can't change the number of visible windows. The number of windows, window size and gutter between them (10px) determine the need for a scroll bar.
The following image is an example of the Fixed mode in Horizontal view.
The following image is an example of the Fixed mode in Vertical view.
The following image is an example of the Fixed mode in Wrap view.
Review Window Right-Click Options
Garment right-click
Avatar right-click