Corrupted Pattern Pieces
Problem: Pattern pieces do not import correctly into VStitcher.
Solution: Check the export DXF (AAMA) settings on the software used to create the DXF file. In particular, ensure the layers are set correctly.
For example, the following table summarizes the settings for exporting a DXF file from Lectra software. It may be useful as a guide for other software if no other recommendations are available.
|
Name |
Number |
Note |
|---|---|---|
|
Current layer |
0 |
Empty |
|
Contour |
1 |
Closed curve - must include external cut line |
|
End points |
2 |
|
|
Points on curves |
3 |
|
|
Notches |
4 |
Points on curves |
|
Grading lines |
5 |
|
|
Mirror axis |
6 |
|
|
Material axis |
7 |
|
|
Lines to be plotted |
8 |
Internal lines to be plotted |
|
Horizontal material axis |
9 |
Grain line and cross line |
|
Vertical material axis |
10 |
|
|
Lines to be cut |
11 |
Internal lines to be cut |
|
Cutter instructions |
12 |
Tools to be ignored |
|
Drill number 1 |
13 |
Punching holes |
|
Seam Lines |
14 |
Orange - must include sew line |
|
Text |
19 |
Comments
Please sign in to leave a comment.