Garment Techniques
29 articles
Frayed EdgesThis video was recorded using the 2020 September Edition.
Here are three examples of adding frayed edges as shown in the video.
Exampl...
Pleated RufflesThis video was recorded using version 2021.1.
When creating pleated ruffles, here are some important points to note:
The patterns for ...
Ruffles DetailThis video was recorded using version 2021.1.
When creating ruffles, here are some important points to note:
The ruffle patterns need ...
Using Transparent Fabric
With the ability to hide the avatar in the 3D simulated garment, you can use transparent fabrics to show shaping and fit in areas that ...
PintucksThis video was recorded using version 2021.1.
When adding a pintuck, here are some important points to note:
There must be enough full...
Smocking EffectThis video was recorded using version 2021.1.
Smocking effect can be added using one of the following methods:
Method One
Add an addit...
PlisséThis video was recorded using version 2021.1.
Plissé effects can be created using one of the following methods:
Method One
Add plissé ...
Lettuce HemThis video was recorded using version 2021.1.
To create a lettuce hem effect, expand the edge so that it has the fullness to crimp up.
He...
Shirring EffectThis video was recorded using version 2021.1.
Shirring effect is made up of a group of internal lines that are given shrink properties.
W...
Knit Raw Edge Fringe and SlitsWhen creating knit raw edge fringe and slits, here are some important points to note:
Be sure to lower the grid size between 0.3-0.5.
...
Cord LockWhen adding a 3D cord lock, here are some important points to note:
Be sure to use a low grid size for the cord pattern pieces.
Check...
Neck TapeCreating neck tape can be achieved using one of the following two methods:
First method:
Create neck tape as a pattern piece.
Use inser...
Knit Hem with Raw EdgeWhen creating a knit hem with raw edge, here are some important points to note:
Be sure to lower the grid size between 0.3-0.5.
Use a...
Fur with All Over PrintsWhen using fur with all over prints, here are some important points to note:
Be sure to set all other maps to independent.
If the col...
Adding Binding Finishing on EdgesThis video was recorded using version 2021.2
Adding binding finishing on edges can be achieved using one of the following methods:
Met...
Patch Pockets Overlapping Side SeamThis video was recorded using version 2021.2
To add a patch pocket, add internal lines to the patterns where the pocket is stitched. For ...
Pleated Cargo PocketsThis video was recorded using version 2021.2
To create cargo or bellow pockets, slice the patterns into different parts to allow the pock...
Welt PocketsThis video was recorded using version 2021.2
Unlike side or patch pockets, when creating welt pockets, we are unable to create a function...
Tied Button Up ShirtThis video was recorded using version 2021.2
To style a button up shirt with a tied hem effect, use internal lines with shrink applied to...
Simple BowThis video was recorded using version 2021.2
To create a bow, we split a tie into sections and stitch them together.
Here are some import...
Advanced BowThis video was recorded using version 2021.2
To create an advanced bow, we work with separate pieces, fold lines, and pleats.
Here are so...
Double Ended/Two Way ZipperCreating a double ended zipper can be achieved using one of the following methods:
Method One
Replace the stopper with a copy of the pulle...
Covered ZipperThis video was recorded using version 2021.2
To create a covered zipper, draft pattern pieces to cover the smart zipper.
Here are some im...
Half Zip WindbreakerThis video was recorded using version 2021.2
To create a ¼ or ½ zip on a garment, create a cut for an opening that fits the width and len...
Zipper Guard with GarageThis video was recorded using version 2021.2
To create a zipper guard with garage, we recommend using one pattern layer with double physi...
Replacing a Zipper PullerThis video was recorded using version 2021.2
Here is one important point to note:
The replacement zipper puller must be a 3D object.
Tassel DrawcordWhen creating a tassel drawcord, here are some important points to note:
Be sure your tassel pieces and drawcord grid size is set to 0....
Tunneled DrawcordWhen creating a tunneled drawcord, here are some important points to note:
Be sure to use a negative fold angle for the folded pattern
...